FIIO E10K Type-C USB DAC & Headphone Amplifier
۱۶,۹۹۰,۰۰۰ تومان
توضیحات
FiiO E10K-TC Specs
| Form Factor | Tabletop |
| Number of Headphone Channels | Single Channel |
| Recommended Headphone Impedance | 16 to 150 Ohms |
| Headphone Output Power | > 200 mW into 32 Ohms |
| Digital Chipset | DAC: 1 x Texas Instruments (TI) PCM5102 USB: XMOS XUF208-128-QF48 |
| Analog Circuitry | Low-Pass Filter Op-Amp: 1 x OPA1662 1 x LMH6643 |
| EQ | Bass Boost |
| Display | None |
Connectivity
| Analog Audio I/O | 1 x 1/8″ / 3.5 mm TRS Unbalanced Stereo Headphone Output 1 x 1/8″ / 3.5 mm TRS Unbalanced Stereo Line Output |
| Digital Audio I/O | 1 x RCA Coaxial Output |
| USB | 1 x USB Type-C (USB 2.0, Digital Input) |
| Wireless Connectivity | None |
Performance
| Frequency Response | 20 Hz to 20 kHz ±0.42 dB |
| Gain/Trim Range | Headphone: 1.6 dB (Low) 8.8 dB (High) |
| Impedance | 1/8″ / 3.5 mm Headphone : 1.2 Ohms (32-Ohm Load) |
| THD+N | Outputs: ≤ 0.006% |
| SNR | > 114 dB (A-Weighted) |
| Noise | Headphone: 7.8 µV 8.7 µV Line: 3.3 µV |
| Crosstalk | 74 dB 95 dB |
| Channel Balance | < 0.2 dB |
Digital Audio
| Sample Rates | Up to 384 kHz (PCM) Coaxial S/PDIF: Up to 192 kHz (PCM) |
| Bit Depths | Up to 32-Bit (PCM) |
Compatibility
| Mobile Device Compatibility | None |
Power
| Power Requirements | USB Bus Power |
| DC Input Power | 5 VDC at 500mA (USB Bus Power) |
| AC/DC Power Adapter | None |
Physical
| Dimensions | 3.1 x 1.9 x 0.8″ / 79 x 49.1 x 21 mm |
| Weight | 2.8 oz / 78.0 g |
| وزن | 0.5 kg |
|---|
تنها مشتریانی که این محصول را خریداری کرده اند می توانند نظر ارسال کنند
هنوز دیدگاهی داده نشده است